How to connect Kehua ups with mains power?

How to connect Kehua ups with mains power?

It is recommended to use more than 10kW UPS power supply and less than 6 UPS wires. Wires need copper cores.

1. It is recommended to use 6 square wires for UPS above 10kW and 4 square wires for UPS below 10kW. Wires need copper cores.

2. The most important way to install Kehua UPS is to connect the battery. The key to connecting the battery is to connect the positive pole to the negative pole, and then connect each electric recovery cell in series to form two power lines. One positive pole and one negative pole are connected to the air switch.

3. Kehua battery power cord can be made into a plug to connect to the ups host or other sockets on the ups host.

4. There are two formats for the input of Kehua UPS host: one is mains power access, the other is battery access, mains power access is 220V or 380V power supply access, live line access L and zero line access n.

5. Kehua battery access host has positive and negative access, battery positive access host has positive access, Kehua battery negative access host has negative access, remember not to connect backward.

6. The output terminal is the power supply that can be loaded into the equipment, that is, the power supply we finally need; The main controller will automatically stabilize the voltage to avoid damage to the instrument due to voltage shock.